HX-40RAM
Specifications
| Model | HX-40RAM |
| Detection method | Passive infrared |
| PIR Coverage | 12 m (40 ft.) 85° wide / 94 zones |
| Distance limit | 4 m, 5.5 m, 9 m, 12 m (13 ft, 18 ft, 30 ft, 40 ft.) |
| Detectable speed | 0.3 – 1.5 m/s (1 – 5 ft/s) |
| Sensitivity | 2.0°C (3.6°F) at 0.6 m/s |
| Power input |
2.5 – 9VDC 3 - 7.2VDC Lithium Battery (CR123A x 3, CR2 x 3, 1/2AA x 3, 1-2AA x 6) |
| Current draw | 30 ?A (standby) / 4mA (max) at 3VDC |
| Alarm period | 2.0 ± 1 sec |
| Warm-up period | Approx. 60 sec(LED blinks) |
| Alarm output | Form C - Solid State Switch - 10VDC 0.01A max |
| Tamper output | Form C. 28V DC, 0.1A max. changes when cover is removed |
| Trouble output | N.C./N.O. Selectable - Solid State Switch - 100VDC 0.01A |
| Aux input | - |
| LED indicator |
Disable : During normal operation. Enable : During WALK TEST or LED SW on. Red : Warm-up, Alarm, Trouble, Low battery |
| RF Interference | No alarm 10 V/m |
| Operating temperature | -20 – +60°C (-4 – +140°F) |
| Environment humidity | 95% max |
| Weatherproof | IP55 |
| Mounting | Wall (Outdoor, Indoor) |
| Mounting height | 2.5 - 3.0 m (8.3 - 10 ft.) |
| Bracket adjust angle | Vertical: ± 20° Horizon: ± 95° |
| Weight | 600g (21.2 oz) |
| Accessories |
Bracket, Hood, Area masking seal, |
